Available project(s) in other Disiplines

Sr. No.
Discipline
Project Duration
Title
(Click on Title to see the Abstract)
Project Status

1

B.E./B Tech Material Science / Metallurgy

6 Months
Characterization and Tribological Evaluation of TiAlN Thin Films Deposited by Reactive Magnetron Sputtering


Closed
2
B.Tech (Chemical Engg)/Materials Sci. preferably with a prior exposure in preparation of nanostructures
5 Months
Preparation and study of alloy nanostructures by thermal plasma
Closed
3
M.E/M.Tech (Chemical / Environmental)
1 Year
Open
4
M.E/M.Tech (Chemical / Environmental)
1 Year
Open


  Available project(s) in Physics

Sr. No.
Discipline
Project Duration
Title
(Click on Title to see the Abstract)
Project Status

1

Physics

3 Months

Study of Shear Thinning and Shear Thickening in 2D Fluids:
Physics and Numerical Simulation.


Closed

2

Physics


1 Year

Study of alloy nanostructures prepared by thermal plasma


Closed

3

Physics

1 Year
Development and Characterization of Silicon Oxide Based Inter-phase Layer Coating on Cf  for High Temperature Applications of Cf/SiC Composite.

Closed
4
Physics
1 Year
Estimation of solid hydrogen pellet ablation rate in high temperature plasma
Closed
5
Physics
3 Months
Effect of magnetic islands on generation and extraction of runaway electrons in Aditya Tokamak
Closed
6
Physics
8-10 Months
Study of thermal conductivity/diffusivity assessment of various cryogenic and fusion materials at low temperature
Closed
7
Physics
6-12 months
Development and Characterization of Silicon Oxide Based Inter-phase Layer Coating on Cf for High Temperature Application of Cf/SiC composite 
Closed
8

Physics
8-9 Months
Estimation of solid hydrogen pellet ablation rate in high temperature plasma.
Closed
9
Physics
6-8 months
Synthesis, Optimization and  Characterization of Zinc Oxide - Nano Particles Process by Sol-Gel Technique
Close
10
Physics
5-6 Months
Development of diagnostics for the study of Laser produced plasma
Close
11
Physics
6-8
months
Characterization of fast supersonic valve
Closed
12
Physics
4-6 months
Experiments of Long-Time Confinement of Non-Neutral Plasma in a Partial Torus
Closed
13
Physics
6 months
Open
14
Physics
3 months
Flux Correlated Schemes for Fluid Simulation
Closed
15
Physics
3 Months
Studies on treatment of industrial ash using thermal plasma technique
Closed
16
Physics
6 Months
Open
17
Physics
6-8 Months
Open
18
Physics
3 Months
Open
19
Physics
1 Year
Open



Available project(s) in   Mechanical / Metallurgy / Remote handling / Mechatronics.

Sr. No.
Discipline
Project Duration
Title
(Click on Title to see the Abstract)
Project Status
1
ME/M. Tech (Metallurgical Engg/Material Science)
1 Year
Sintering and its effect on the bulk density of Li2Tio3 pebbles prepared by freeze granulation method

Closed
2
BE/ B.Tech (Mechanical)
3 Months
Thermo-structural performance analysis of W – Cu Plasma facing components

Closed
3
M.E. / M. Tech. (Metallurgy / Materials Technology) or other relevant branch
1 Year
A Study of Additives Effect on Densification of Magnesium Aluminate Powders Processed by Sol-Gel Technique

Closed
4
M.Tech in (Material Science / Metallurgy / Industrial Metallurgy / Welding Technology / Production / Manufacturing)
1 Year
Development of Activated flux TIG welding of copper pipe using Orbital TIG technique
Closed
5
M.Tech in (Material Science / Metallurgy / Industrial Metallurgy / Welding Technology / Production / Manufacturing)
1 Year
Characterization of dissimilar weld joint of Copper to SS through Inconel transition using Orbital TIG technique
Closed
6
M.E. / M. Tech. (CAD / Design)

1 Year
Mechanical design of former for solenoid and modified triangular shape magnet considering integration with exiting winding machine

Closed
7
M.E. / M. Tech. (CAD / Design)

1 Year
Design and engineering investigations of cryostat housing for low temperature application

Closed
8
M.E. / M. Tech. (Thermal)

1 Year
Design, Analysis and Experimental set up preparation for Hydrogen PPM Measurement

Closed
9
M.E. /M. Tech (CAD/CAM)
08 Months
Development of Robotics Based Maintenance Concepts for In-vessel components using Virtual Reality
Closed
10
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Design and Prototyping of parallel manipulator for Remote Handling (RH) application
Closed
11
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Design of Self-supporting joint for redundant robotic arm
Closed
12
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Multi Body Dynamics of redundant robotic arm with tendon routing
Closed
13
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Design and Prototyping of adaptive gripper for Articulated Remote Handling (RH) Arm
Closed
14
ME (Metallurgy)
12 Months
Influence of substrate bias and temperature on multilayer coatings on AISI 316L stainless steel
Closed
15
M.E. / M. Tech. (CAD / Design)
6 Months
Design of external pressure vessel having rectangular cross-section (2000mm x 2000 mm x 1000 mm) using ASME code
Closed
16
M.E. / M. Tech. (CAD / Design)
6 Months
Design of external pressure vessel having internal diameter 500 mm and length 2000 mm using ASME code.
Closed
17
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Study of Pumping Behaviour of Test Cryopumping System
Closed
18
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Study of Cryo-pump Exhaust Gas Processing Unit
Closed
19
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Study on impact strength of high speed plastic materials
inside the curved guide and its application to solid hydrogen
Closed
20
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Design of compact thermal heat switch for low temperature application
Closed
21
M.E./M.Tech (Thermal/ Cryogenic/ CAD-CAM/ Machine design)
10 Months
Design of UHV compatible permeation measurement system
Closed
22
M.E./M.Tech (Thermal/ Cryogenic)
10 Months
Design of activated carbon based refrigeration system
Closed
23
M.E./M.Tech (Thermal/ Cryogenic)
10 Months
Design of cryogenic sorption based industrial air pollution control equipment
Closed
24
M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
1 Year
Development of a test facility and measurement of performance of 2-stream (He/He) plate-fin heat exchanger
Closed
25
M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
1 Year
Development of a test facility and measurement of performance of 3-stream (He/He/He) plate-fin heat exchanger
Closed
26
M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
1 Year
Development of a test facility and measurement of performance of 20 K Helium Purifier
Closed
27
M.E./M.Tech (Thermal / Cryogenic / Chemical)
1 Year
Development of a test facility and measurement of performance of 80 K Helium Purifier
Closed
28
M.E./M.Tech (Thermal / Cryogenic / Physics)
1 Year
CFD analysis for flow mal-distribution in 2-stream (He/He) cryogenic plate-fin heat exchanger
Closed
29
M.E./M.Tech (Thermal / Cryogenic / Physics)
1 Year
Development of a software for design and optimization of counter-flow type cryogenic plate-fin heat exchangers
Closed
30
M.E./M.Tech (Thermal / Cryogenic / Turbomech or Similar specialization)
1 Year
Development of test set-up and performance measurement on adoption of air compressor system for helium gas
Closed
31
BE/ B.Tech (Mechanical)
06 Months
Pressure vessel design as per ASME for high pressure and high temperature application
Closed
32
BE/ B.Tech (Mechanical)
1 Year
Thermal diffusivity measurement of sintered lithium ceramic compacts
Closed
33
M.E./M.Tech (Mechanical)
06 Months
Design and Analysis of ITER XRCS Edge Movement Compensator
Closed
34
BE/ B.Tech (Mechanical)
03 Months
Design and Analysis and related Optimization of Liquid Helium and Liquid Nitrogen Cryogenic Transfer lines
Closed
35
BE/ B.Tech (Mechanical / Metallurgical / Chemical)
06 Months
Thermal Diffusivity measurement of sintered lithium ceramic compacts
Closed
36
M.E./M.Tech (Mechanical/Nuclear)
06 Months
Measurement of Effective Thermal Conductivity of Ceramic breeder pebble bed by Steady State Method
Closed
37
BE/ B.Tech (Mechanical / Metallurgical / Material Science)
06 Months
Heat treatment study of IN-RAFM steel and its effect on Microstructure and Mechanical properties
Closed
38
M.E / M.Tech (Metallurgical Engineering / Materials Science )
1 Year
Study of Plasma Nitriding treatment on aluminized steels
Closed
39
M.E / M.Tech (Metallurgical Engineering / Materials Science )
1 Year
Aluminized coatings on Ti Alloys
Closed
40
BE/ B.Tech (Mechanical)
03 Months
Rigid Body Dynamics of pantograph mechanism
Closed
41
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 Year
Mechanical property investigation of aluminized RAFM steels
Closed
42
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 Year
Experimental study of packed bed thermal diffusivity measurement by laser flash method
Close
43
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 Year
Open
44
M.E. /M. Tech (Thermal/Cryogenic)
10 months
Study of pumping behaviour of different gasses on activated charcoal sorbents
Closed
45
M.E. /M. Tech (Thermal/Cryogenic)
10 months
Development of a low speed solid hydrogen ice ejection system
Closed
46
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 year
Influence of microstructure on Thermo-mechanical fatigue behavior of IN-RAFM steel
Closed
47
M.E / M.Tech (Metallurgical / Production/Mechanical )
1 year
Lithium titanate Pebble preparation by freeze granulation method
Closed
48
M.E / M.Tech (Mechanical )
1 Year
Acoustic effect on plate
Closed
49
BE/ B.Tech (Mechanical / Production)
03 Months
Open
50
M. E. / M. Tech. (Metallurgical /Materials Science )
1 Year
Open
51
M. E. / M. Tech. (Metallurgical /Materials Science )
1 Year
Open
52
M.E / M.Tech (Mechanical / Thermal)
10 Months
Open
53
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Open
54
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Open
55
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Open
56
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Open
57
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Open
58
B.E. / B. Tech (Mechanical)
06 months
Open
59
B.E. / B. Tech (Mechanical)
06 months
Open


  Available project(s) in Electrical/Electronics/IT/Computer Engineering/MCA Discipline

Sr. No.
Discipline
Project Duration
Title
(Click on Title to see the Abstract)
Project Status
1
M.E./M. Tech Electronics and Communication /Instrumentation and Control
1 Year
Laser beam stabilization using Ethernet based Picomotor controller
Closed
2
B. E./ B. Tech in Computer Engineering or Computer Science Engineering

3 Months
Development of Web based graphical user interface (GUI) for a signal denoising tool
Closed
3
B.E./B. Tech Electronics and Communication

3 Months
Development of software interface for USB based  data acquisition hardware and analysis of acquired signal
Closed
4
B. E./ B. Tech in Computer Engineering or Computer Science Engineering

3 Months
Design and Development of IPR Library Web Portal for Digital Contents
Closed
5
M.E./M. Tech (VLSI/ Embedded/ DSP) with good command over VHDL

1 Year
Design of FPGA based Lock in amplifier
Closed
6
M.E./M. Tech DSP or Computer Science
1 Year
To study the possibility of quantification of Cs deposition on surface of plasma grid plate by image segmentation technique
Closed
7
M.E./M. Tech  Electronics
6 months
Implementation of feedback control system for generation of regulated high voltage output of 10kV and 1A using SMPS topology
Closed
8
M.E./M. Tech Electronics
6 months
Design and development of 1kV, 3A DC supply with voltage and current regulation
Closed
9
M.E./M. Tech  Electronics
6 months
Design and development of solid state RF (2-13.56MHz) module (50-100W)
Closed
10
M.E./M. Tech Electronics and Communication /Instrumentation and Control
1 Year
Development of PLC based instrumentation system for the Thomson Scattering Diagnostic

Closed
11
M.E./M. Tech Electronics and Communication
10 Months
Development of 150W Solid State Broadband Amplifier at 13.56MHz

Closed
12
M.E./M. Tech Electronics and Communication
10 Months
Development of 100W Broadband Dual Directional Coupler for  10 to 80MHz

Closed
13
M.E./M. Tech Electronics and Communication
9 to 12 Months
Data processing techniques for analyzing Ka-band reflectometry data using Python

Closed
14
M.E./M. Tech Electronics and Communication
9 to 12 Months
A Wave Collection and Transport System for K and Ka band FMCW Reflectometer for Aditya-U tokamak

Closed
15
M.E./M. Tech Electronics and Communication / Instrumentation & Control
6 Months
Application Development for PLC based Control System for High Voltage Power Supply
Closed
16
M Tech (VLSI/ Embedded/ DSP) with good command over VHDL
1 Year
Design and simulation of FPGA based data link
Closed
17
M.Tech/M.E. (Electrical Engineering/Power Electronics/Machines & Drives)
1 Year
Analysis and feasibility of up-gradation for electrical and control aspects of special purpose winding machine

Closed
18
M.E./M. Tech Electronics and Communication / Instrumentation & Control
1 Year
To develop a Microcontroller based Control& Monitoring application for Test Simulator/Jig of Centralized Interlock & Protection Module

Closed
19

B. E./ B. Tech/M. Sc in Computer Engineering or IT / MCA
3 months
Development of Web based portal for Central authentication and authorization service (CAAS)
Closed
20
M. E./M. Tech/M. Sc in Computer Engineering or IT
1 Year
Use of Network Access Control (NAC) software for wired and wireless LAN security
Closed
21
M.E./M. Tech Electronics and Communication / Computer Engg / IT Engg, MCA
1 Year
Development of a GUI based software for design of cryogenic plate-fin heat exchangers and cryogenic components
Closed
22
M.E./ M. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA
1 Year
Image processing and signal recovery from the Instrumentation and control device for the test facility of cryogenic systems
Closed
23
B.E. /B. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA
3 – 6 Months
Open
24
M.E./M. Tech Electronics and Communication or related field
1 Year
A study on Metamaterial coaxial waveguide
Closed
25
M.E./M. Tech Electronics and Communication or related field
1 Year
A study on Analysis and Design of Metamaterial-Loaded Helical Antenna
Closed
26
M.E./M. Tech (Electronics/ Control branches having good programming skills)
12 Months
Development of command and control interface application for prototype robotic articulated arm
Closed
27
M.E./M. Tech (Electronics/ Control/ Computer Science)
12 Months
Development of Virtual Reality based Interactive Simulator for an articulated robotic arm
Closed
28
M.E. /M. Tech (Electronics/ Control System)
12 Months
Development of a Robotics control framework for multi DOF articulated robotics system
Closed
29
M.E. /M. Tech (Electronics/ Control System)
08 Months
Kinematic Design and Control System Development for Parallel Manipulator.
Closed
30
M.E. /M. Tech (Electronics/ Control System)
08 Months
Control System development for Hyper-redundant robot with Virtual Reality Interface
Closed
31
M.E. /M. Tech (Electronics with Control System Specialization, having good coding skills in either MATLAB or C++)
10 Months
Development and Verification of Optimization Algorithm for Coverage Path Planning
Closed
32
B.E. /B. Tech Electronics / Electronics & Communication / Instrumentation
(2 number of students)
1 Year
Development and programming of the Industrial Process demo control system for interfacing varieties of sensor inputs
Closed
33
B.E. /B. Tech Electronics / Instrumentation
(3 number of students)
1 Year
Development of a fast response Ionisation gauge controller for the measurement of pressure in UHV range
Closed
34
M.E. /M. Tech Electronics and Communication Engineering
1 Year
Study, design and simulation of millimeter wave sensor for high power stray radiation
Closed
35
M.E. /M. Tech Electronics and Communication Engineering
8 to 12 months
Wave Collection and Transport System for Michelson Interferometer Diagnostics (70-500 GHz) for SST-1 Tokamak
Closed
36

M.E./M. Tech Electronics and Communication /Instrumentation and Control
10 Months
Open
37
M.E./M. Tech Electronics and Communication /Instrumentation and Control
10 Months
Open
38
M.E./M. Tech Electronics and Communication /Instrumentation and Control
10-12 months
Development of a control system for hydrogen gas freezing vacuum system
Closed
39
B.E. /B. Tech Electronics / Electronics & Communication / Instrumentation
(2 number of students)
1 Year
Low  Voltage  Data acquisition and Measurement
Closed
40
B.E. /B. Tech Electronics / Electronics & Communication / Instrumentation
(2 number of students)
1 Year
TCP/IP based Remote Parameter Setting of Analog Signal Conditioning Electronics for Plasma Diagnostics in ADITYA-Upgrade
Closed
41
M.E./M. Tech Electronics and Communication /Instrumentation and Control
10 Months
Design and development of programmable solenoid triggering circuit
Closed
42
M.E./ M. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA

1 Year
Software Programming of BCI Interface
Closed
43

M.E./ M. Tech in Electronics and Communication
1 Year
Development of 40W Solid State Broadband Amplifier at 38 ± 8MHz
Closed
44
B.E./ B. Tech in Electronics and Communication
3 – 6 Months
Open
45

M.E./ M. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA
1 Year
HART Modem development for Communication with Instruments
Closed
46
B.E. /B. Tech Electronics / Electronics & Communication
(2 number of students)
1 Year

To develop a LabVIEW based application for post operation data visualization and report generation for a High Power RF Source System
Closed
47
M.E./ M. Tech in Electronics and Communication/ Microwave
1 Year

Analysis and Investigation of Waveguide Mode Launcher for SYMPLE
Closed
48
M.E./ M. Tech in Electronics and Communication / Computer Engg
1 Year
Work on Software Defined Radio (SDR)
Closed
49
M.E./M. Tech Electronics and Communication /Instrumentation and Control
1 Year
Design and development of IR Camera Front-end Electronics Engine
Closed
50
B.E./B. Tech Computer science/ Engineering
04 to 06 months
Open
51
B.E./B. Tech Computer science/ Engineering
04 to 06 months
A prototype software for probe positioning system testing and characterization
Closed
52
M.E./ M. Tech in Electronics and Communication/ Microwave
1 Year
Development of Magnetron Source for Extraction of 1KW Power from Conventional Microwave Oven
Closed
53

B.E./B. Tech Computer science/ Engineering (1 student)
04 to 06 months
Open
54

M.E./ M. Tech in Electronics /Electronics and Communication / Instrumentation &Control
1 Year
Development of Instrumentation and process control for Compressor system of cryo test facility
Closed
55

M.E./ M. Tech in Electronics/ Electronics and communication /Instrumentation &Control
1 Year
Development of instrumentation and control system for the test facility of turbines of helium plant
Closed
56
M.E./ M. Tech in Electronics /Electronics and Communication
10 Months
Development of data analysis software for the BCI acquired signals
Closed
57

M.E./ M. Tech in Electronics /EC/Computer Engg/IT/MCA
10 Months
Development of 32 channels BCI-DAQ hardware
Closed
58

M.Sc (Electronics) / B.E./ B. Tech in Electronics
3 Months
Embedded based high voltage pulse power control
Closed
59

B.E. / B. Tech / M.Sc. Information Technology /Computer Science/ Computer Engg. / or MCA
3 Months
Explore and setup open source long term backup and restore solution for large scientific  facility
Closed
60

B.E. / B. Tech / M.Sc. Computer Science/ Computer Engg. / MCA
3 Months
Development of basic data retrieval and analysis software module
Closed
61

B.E. / B. Tech Electronics and Communication
4 Months
Open
62
B.E. / B. Tech Electronics and Communication/Instrumentation
3 Months
To develop Remote Control & Monitoring Application using a Microcontroller for Test Simulator/Jig of Centralized Interlock and Protection Module
Closed
63
B.E. / B. Tech Electronics and Communication/Instrumentation
3 Months
To develop Control &Monitoring Local HMI application using a 7” TFT Panel for Test Simulator/Jig of Centralized Interlock and Protection Module
Closed
64
B.E. / B. Tech Electronics and Communication/Instrumentation
(2 students)
6 Months
Design and development of Instrumentation and control system hardware and software modules for Helium Compressor System
Closed
65
M.E./ M. Tech Computer Science or MCA or Integrated M. Sc (Mathematics)
1 Year
Open
66
B.E. / B. Tech Computer Science/ Computer Engg.
4-6 Months
Open

67
B.E. / B. Tech Computer Science/ Computer Engg.
6 Months
Development of SLAM based Environment Mapping algorithms for aerial surveillance through narrow spaces
Closed
68
B.E. / B. Tech Electronics and Communication/Instrumentation
4-6 Months
Wireless communication using ZigBee for High Heat Flux Test Facility (HHFTF)
Closed
69
B.E./ B. Tech Instrumentation & Control & 02
4-6 Months
Study and development of control logic using the CODAC core system and Industrial Control Library (ICL) for Cryoplant Termination Cold Box (CTCB)
Closed
70
M.E./M. Tech Electronics / Electronics and Communication or Computer Science / Computer Engineering or M.Sc. in Computer Science
1 year
Open
71
M.E./M. Tech Electronics / Electronics and/or  Instrumentation Engineer
8 to 12 Months
Development of EPICS based software to control & monitor Scientific Instruments
Closed
72
B.E. / B. Tech Electrical Engineering
3 Months
Study of Partial Discharge Characteristic in Gaseous & Solid Insulating Medium
Closed
73
B.E./B. Tech in Electronics/Electronics and Communication/Electrical
4-6 Months
Open
74
B.E./B. Tech in Electronics/ Control/ Computer Science
4-6 Months
Open
75
B.E. /B. Tech in Computer science Engineering/ MCA/ M.Sc. Physics
3-6
Months
Development of Python Based Program to Generate Graphical Output of Fluxes and Reaction Rates from 1-D Radiation Transport Code, ANISN
Closed
76
B.E. /B. Tech in Electronics and communication Engineering
3 Months
Open
77
ME / MTech / MSc in Electronic / Communications / Control / Opto-electronics /Instrumentation / Signal processing
1 Year
Development of automated measurement set-up for performance evaluation of Optoelectronic system
Closed
78
ME / MTech in Electronic / Communications / control / Signal
processing
1 Year
Development of Reconfigurable power supply controller
Closed
79
ME / MTech in Electronic / Communications / Instrumentation
and control
1 Year
Implementation of SCADA-PLC and LabVIEW based interlock system
Closed
80
BE/B.Tech in Electronics / Instrumentation
3 Months
Open
81
M.E. / M. Tech Electrical / Electronics Engineering
1 Year
Open
82
B.E. / B. Tech Electrical / Electronics Engineering
4 Months
Open
83
M.E. / M. Tech Electrical Engineering/ Nuclear Engineering
1 Year
Analysis of SST1 PF coil reflected voltage and mitigation techniques
Closed
84
M.E./ M. Tech in Computer Science / IIT or M.Sc. Physics or MCA
6 – 8 Months
Open
85
M.E./M. Tech. in Electronics and Communication, Embedded / Computer/Instrumentation Engineering
1 Year
General purpose instrumentation and control hardware and software using FPGA
Closed
86
M.E./M. Tech. in Electronics and Communication, Embedded, Computer/ Instrumentation Engineering
1 Year
Open
87
B.E. / B. Tech in Electronics & Communication, Instrumentation and Control
3-6 Months
Open
88
B.E. / B. Tech in Electronics & Communication, Instrumentation and Control
3-6 Months
Open
89
B.E. / B. Tech in Electronics & Communication, Instrumentation and Control
3-6 Months
Open
90
M.E./M. Tech. in Electronics / Instrumentation Engineering
1 Year
Open